• Follow us
Home > News > Content
The SMC water tank
Dec 09, 2017

The SMC water tank is assembled from the SMC molding plate, sealing material, metal structure and piping system. It brings great convenience to the design and construction. The general water tank is designed according to the standard, special water tank needs special design. A 0.125-1500 cubic meter of water tank can be assembled according to the needs of the user. If the original water tank needs to be replaced, it does not need to remould the house, so it has a strong adaptability. Specially developed product seal belt, the sealing belt is nontoxic, water resistant, elastic, permanent and tight, tight and sealed. The water tank has a high overall strength, no leakage, no deformation, convenient maintenance and maintenance. The SMC molded tank plate is made of glass fiber reinforced material with high temperature and high pressure. Plate sizes are 1000 x 1000, 1000 x 500 and 500 x 500 plate, with plate thickness 6mm, 8mm, 10mm, 12mm, 14mm, 16mm. The following 1 Properties and cleaning performance and so the Beijing city health and epidemic prevention station of chemical and toxicological test, Chinese Medicine Institute of Environmental Health Sciences and Health Engineering Prevention Evaluation: synthetic materials in the toxic and disable compounds found not; and the volatiles detection results of GC-MS identification, SMC water immersion the liquid was found compound content and high toxicity; toxicity test: animal experiment results show that SMC water immersion had no acute toxicity and cumulative toxicity. The water quality of the box body soaked in accordance with the national standard of drinking water (GB5749-85) and the water quality standard of the high water tank in Japan. Therefore, the use is safe and reliable. 2, specifications and performance SMC mould pressure single board specifications (if other specifications can be negotiable): 1000x1500mm, 1000 x 1000mm, 1000 x 500mm, 500 x 500mm. The thickness is 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, and the single board of the 5mm thickness is specially designed for the tank cover. SMC mold pressure water tank carries out the national building materials industry standard: (JC658.1-1997)